manualshive.com logo in svg

Acer s10, Manual, Page: 2 / 338

Share
Download
Acer s10 Manual Download Page 2

COPYRIGHT

Copyright © 2001 Acer Inc. or its subsidiaries
All Rights Reserved. Printed in Taiwan. 

Acer s10 handheld Manual
Original issue:  October, 2001

Acer and the Acer logo are registered trademarks of Acer Inc.  Graffiti, HotSync, and Palm OS are registered trademarks.
HotSync, Palm, and the Palm logo are trademarks of Palm, Inc. or its subsidiaries. Other company’s product names or trademarks
are used herein for identification purpose only and belong to their respective companies. 

Changes may be made periodically to the information in this publication without obligation to notify any person of such 
revision or changes. Such changes will be incorporated in new editions of this Manual or supplementary documents and 
publications.

No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in any form or by any means, 
electronic, mechanical, photocopy, recording, or otherwise, without the prior written permission of Acer Inc.

DISCLAIMER AND LIMITATION OF LIABILITY

Acer and its subsidiaries makes no representations or warranties, either expressed or implied, with respect to the contents 
hereof and specifically disclaims the implied warranties of merchantability or fitness for a particular purpose. Acer and its 
subsidiaries assume no responsibility for any damage or loss resulting from the use of this Acer s10 handheld Manual.

NOTES

Record the device ID, serial number, purchase date, and place of purchase information in the space provided below. The serial
number and device ID are recorded on the label affixed to your Acer s10 handheld. All correspondence concerning your unit
should 
include the serial number, device ID, and purchase information.

Acer s10 handheld

Device ID: _________________________________

Serial Number: ____________________________

Purchase Date: ____________________________

Place of Purchase: _________________________

Summary of Contents for s10



















































































































































































































































































































































Reviews:

No comments