ABB RED650, Technical Manual, Page: 732 / 926

Input POSITION is a double-indication signal, and it is GI enabled. This means
that any state transition, that is to ON, OFF, intermediate and faulty, is reported
spontaneously. However, the intermediate and faulty states may be suppressed by
setting the
Report Intermediate Position = Off . See the settings for RS485 and
optical serial communication for more information.
Input SELECT is a single-indication signal, and it is also GI enabled. State
transitions to ON and OFF are reported spontaneously.
When input BLOCK is ON, the function will ignore GI requests and cease all
monitoring activity. Consequently, no transitions will be detected.
The I103POSCMD function is also equipped with two additional commands:
Operate and Cancel. These are hidden in ACT and respond only to base INF +2
and +3 respectively. The base INF (Information Number) parameter is an IEC
60870-5-103 identifier that associates a function in a 103 Master (such as Scada)
with its equivalent in the IED.
18.8.14.2 Identification
GUID-ABF81C27-4605-4A15-9CF5-77FF82DE8747 v1
Function description Function block
name
IEC 60617
identification
ANSI/IEEE C37.2
device number
IED commands with position and select
for IEC 60870-5-103
I103POSCMD - -
18.8.14.3 Function block
GUID-3A31C1F2-1FB5-4DB0-A698-AD3F55738DB1 v1
IEC10000286-1-en.vsd
I103POSCMD
BLOCK
POSITION
SELECT
IEC10000286 V1 EN-US
Figure 349: I103POSCMD function block
18.8.14.4 Signals
PID-6997-INPUTSIGNALS v1
Table 528: I103POSCMD Input signals
Name Type Default Description
BLOCK BOOLEAN 0 Block of status reporting
POSITION INTEGER 0 Position of controllable object
SELECT BOOLEAN 0 Select of controllable object
Section 18
1MRK 505 394-UEN A
Station communication
726 Line differential protection RED650 2.2 IEC
Technical manual