ABB RED650, Technical Manual

Page: 49 / 926

IEC 61850 or
function name
ANSI Function description Line differential
RED650 (A11)
SXCBR Circuit breaker 3
SCILO Interlocking 1
SCSWI Switch controller 1
XLNPROXY Proxy for signals from switching device via GOOSE 3
SLGAPC Logic rotating switch for function selection and LHMI presentation 15
VSGAPC Selector mini switch 30
DPGAPC Generic communication function for Double Point indication 16
SPC8GAPC Single point generic control function 8 signals 5
AUTOBITS Automation bits, command function for DNP3.0 3
SINGLECMD Single command, 16 signals 4
I103CMD Function commands for IEC 60870-5-103 1
I103GENCMD Function commands generic for IEC 60870-5-103 50
I103POSCMD IED commands with position and select for IEC 60870-5-103 50
I103POSCMDV IED direct commands with position for IEC 60870-5-503 50
I103IEDCMD IED commands for IEC 60870-5-103 1
I103USRCMD Function commands user defined for IEC 60870-5-103 4
Secondary system supervision
CCSSPVC 87 Current circuit supervison 1
FUFSPVC Fuse failure supervision 1
Logic
SMPPTRC 94 Tripping logic 6
SMAGAPC General start matrix block 6
STARTCOMB Start combinator 32
TMAGAPC Trip matrix logic 12
ALMCALH Logic for group alarm 5
WRNCALH Logic for group warning 5
INDCALH Logic for group indication 5
AND, GATE, INV,
LLD, OR,
PULSETIMER,
RSMEMORY,
SRMEMORY,
TIMERSET, XOR
Basic configurable logic blocks (see Table 3 ) 40–420
FXDSIGN Fixed signal function block 1
B16I Boolean to integer conversion, 16 bit 18
BTIGAPC Boolean to integer conversion with logical node representation, 16 bit 16
IB16 Integer to Boolean 16 conversion 18
ITBGAPC Integer to Boolean 16 conversion with Logic Node representation 16
Table continues on next page
1MRK 505 394-UEN A
Section 2
Available functions
Line differential protection RED650 2.2 IEC 43
Technical manual