ABB FEPL-02 Ethernet POWERLINK, User Manual

Page: 36 / 142

36 Start-up
28 FBA A/B par table
ver Read-only. Displays the parameter table
revision of the fieldbus adapter module
mapping file stored in the memory of the
drive.
In format xyz , where
x = major revision number
y = minor revision number
z = correction number
OR
in format
axyz , where
a = major revision number
xy = minor revision number
z = correction number or letter.
N/A
Parameter table revision
29 FBA A/B drive type
code Read-only. Displays the drive type code of
the fieldbus adapter module mapping file
stored in the memory of the drive.
N/A
Drive type code of the fieldbus adapter
module mapping file
30 FBA A/B mapping
file ver Read-only. Displays the fieldbus adapter
module mapping file revision stored in the
memory of the drive in decimal format.
N/A
Mapping file revision
31 D2FBA A/B comm
status Read-only. Displays the status of the
fieldbus adapter module communication.
Note: The value names may vary by drive.
0 = Idle
OR
4 = Off-line
0 = Idle Adapter is not configured.
1 = Exec.init Adapter is initializing.
2 = Time out A timeout has occurred in the
communication between the adapter and
the drive.
3 = Conf.err Adapter configuration error: The major or
minor revision code of the common
program revision in the fieldbus adapter
module is not the revision required by the
module or mapping file upload has failed
more than three times.
4 = Off-line Adapter is off-line.
5 = On-line Adapter is on-line.
6 = Reset Adapter is performing a hardware reset.
No. Name/Value Description Default