![background image](http://html.mh-extra.com/html/abb/fepl-02-ethernet-powerlink/fepl-02-ethernet-powerlink_user-manual_191103.webp)
Diagnostics 103
MODULE
Green off
NMT_GS_OFF,
NMT_GS_INITIALISATION,
NMT_CS_NOT_ACTIVE
Flickering green
NMT_CS_BASIC_ETHERNET
Green, single
flash
NMT_CS_PRE_OPERATIONAL_1
Green, double
flash
NMT_CS_PRE_OPERATIONAL_2
Green, triple flash
NMT_CS_READY_TO_OPERATE
Green
NMT_CS_OPERATIONAL
Blinking green
NMT_CS_STOPPED
Red
Error
Flashing orange,
alternating with
the HOST
flashing orange
Internal file system error. The error may
be cleared by cycling drive power. If the
error persists, contact your local ABB
representative.
NET
Blinking green
TX/RX activity
Green
Link(s) are active.
Red
Link(s) are inactive.
Name
Color
Function/state
Summary of Contents for FEPL-02 Ethernet POWERLINK
