ABB ACS880 N5700 Series, Firmware Manual, Page: 446 / 662

Def / Type
FbEq 16b / 32b Description Name / Range /
Selection No.
False / int32 Selects the source of a jog signal (in the negative
direction).
This command is always level-triggered.
In case jogging is activated in both the positive and
negative directions, the one that was activated last
takes priority.
For the selections, see
74.20 Enable sel .
Jog reverse sel 74.23
User Position CW1 bit
4 / int32 Selects the source of a signal that activates the preset
functionality defined in
75.36 Preset position mode .
This command is always edge-triggered.
For the selections, see
74.20 Enable sel .
Set position sel 74.24
- / int32 Selects the source of a signal that activates homing.
Parameter
74.15 Position command trigger type defines
whether the command is edge-triggered or
level-triggered.
For the selections, see
74.20 Enable sel .
Homing sel 74.25
False / int32 Selects the source of a signal that activates the move
in velocity mode function. Parameter
74.15 Position
command trigger type defines whether the command
is edge-triggered or level-triggered.
For the selections, see
74.20 Enable sel .
Velocity sel 74.26
User Position CW1 bit
6 / int32 Selects the source of a signal that activates the move
relative function. Parameter
74.15 Position command
trigger type defines whether the command is
edge-triggered or level-triggered.
For the selections, see
74.20 Enable sel .
Relative sel 74.27
User Position CW1 bit
7 / int32 Selects the source of a signal that activates the move
absolute function. Parameter
74.15 Position command
trigger type defines whether the command is
edge-triggered or level-triggered.
For the selections, see
74.20 Enable sel .
Absolute sel 74.28
False / int32 Selects the source of a signal that activates or provides
the start command for the position index functionality.
Parameter
74.15 Position command trigger type defines
whether the command is edge-triggered or
level-triggered.
For the selections, see
74.20 Enable sel .
Position index sel 74.29
- / int32 Selects the path direction together with 74.31 Path
direction bit 1 sel . See 74.4 Position command status
1 , bit 10. This command is always level-triggered.
For the selections, see 74.20 Enable sel .
Path direction bit 0
sel 74.30
False / int32 Selects the path direction together with 74.30 Path
direction bit 0 sel . See 74.4 Position command status
1 , bit 11. This command is always level-triggered.
For the selections, see 74.20 Enable sel .
Path direction bit 1
sel 74.31
False / int32 Selects the source of a signal that activates the gear-in
function. Parameter
74.15 Position command trigger
type defines whether the command is edge-triggered
or level-triggered.
For the selections, see
74.20 Enable sel .
Gear in sel 74.32
446 Parameters