ABB ACS880 N5700 Series, Firmware Manual, Page: 425 / 662

Def / Type
FbEq 16b / 32b Description Name / Range /
Selection No.
- / - Data to be sent as word 1 in master/follower
communication. 0...65535
- / uint16 Displays the data to be sent onto the master/follower
link as word 2 as an integer.
If no data has been preselected by
61.2 M/F data 2
selection , the value to be sent can be written directly
into this parameter.
M/F data 2 value 61.26
- / - Data to be sent as word 2 in master/follower
communication. 0...65535
- / uint16 Displays the data to be sent onto the master/follower
link as word 3 as an integer.
If no data has been preselected by
61.3 M/F data 3
selection , the value to be sent can be written directly
into this parameter.
M/F data 3 value 61.27
- / - Data to be sent as word 3 in master/follower
communication. 0...65535
None / uint32 Parameters 61.45 … 61.50 preselect data to be sent in
data sets 2 and 4 to the external controller. These data
sets are used in ModuleBus communication with a
“standard drive” (
60.50 DDCS controller drive type =
ABB standard drive ). Parameters 61.95 … 61.100 display
the data to be sent to the external controller. If no data
has been preselected, the value to be sent can be
written directly into these parameters. For example,
this parameter preselects the data for word 1 of data
set 2. Parameter
61.95 Data set 2 data 1 value displays
the selected data in integer format. If no data is
preselected, the value to be sent can be written directly
into parameter
61.95 .
Data set 2 data 1
selection 61.45
0 None. None
1 Control Word (16 bits) CW 16bit
4 Status Word (16 bits) SW 16bit
5 Actual value ACT1 (16 bits) Act1 16bit
6 Actual value ACT2 (16 bits) Act2 16bit
See Terms and abbreviations (page 130) . Other [value]
None / uint32 Preselects the data to be sent as word 2 of data set 2
to the external controller.
See also parameter
61.96 Data set 2 data 2 value .
For the selections, see parameter 61.45 Data set 2 data
1 selection .
Data set 2 data 2
selection 61.46
None / uint32 See parameter 61.45 Data set 2 data 1 selection . Data set 2 data 3
selection 61.47
… … … …
None / uint32 See parameter 61.45 Data set 2 data 1 selection . Data set 4 data 3
selection 61.50
Parameters 425