ABB ACS880 N5700 Series, Firmware Manual, Page: 420 / 662

Def / Type
FbEq 16b / 32b Description Name / Range /
Selection No.
5 The scaling is defined by parameter 46.2 Frequency
scaling .
Frequency
Auto / uint16 Selects the type and scaling of reference 2 received
from the external controller. The resulting value is
shown by
3.12 DDCS controller ref 2 .
For the selections, see parameter 60.60 DDCS controller
ref1 type .
DDCS controller ref2
type 60.61
Auto / uint16 Selects the type/source and scaling of actual value
ACT1 transmitted to the external controller. DDCS controller act1
type 60.62
0 Type/source and scaling follow the type of reference
1 selected by parameter
60.60 DDCS controller ref1
type . See the individual settings below for the sources
and scalings.
Auto
1 Reserved.
2 Reserved.
3 1.10 Motor torque is sent as actual value 1. The scaling
is defined by parameter 46.3 Torque scaling .
Torque
4 1.1 Motor speed used is sent as actual value 1. The
scaling is defined by parameter 46.1 Speed scaling .
Speed
5 1.6 Output frequency is sent as actual value 1. The
scaling is defined by parameter 46.2 Frequency scaling .
Frequency
Auto / uint16 Selects the type/source and scaling of actual value
ACT2 transmitted to the external controller. DDCS controller act2
type 60.63
0 Type/source and scaling follow the type of reference
2 selected by parameter
60.61 DDCS controller ref2
type . See the individual settings below for the sources
and scalings.
Auto
1 Reserved.
2 Reserved.
3 1.10 Motor torque is sent as actual value 2. The scaling
is defined by parameter 46.3 Torque scaling .
Torque
4 1.1 Motor speed used is sent as actual value 2. The
scaling is defined by parameter 46.1 Speed scaling .
Speed
5 1.6 Output frequency is sent as actual value 2. The
scaling is defined by parameter 46.2 Frequency scaling .
Frequency
0 / uint16 Selects the pair of data sets used by the mailbox service
in the drive/controller communication.
See section
External controller interface (page 74) .
Mailbox dataset
selection 60.64
1 = 1 / 1 = 1 Data sets 32 and 33. 0...1
- / uint16 Activates DDCS controller communication monitoring
separately for each control location (see section
Local
control vs. external control (page 23) .
The parameter is primarily intended for monitoring the
communication with the controller when it is connected
to the application program and not selected as a
control source by drive parameters.
DDCS controller
comm supervision
force 60.65
420 Parameters