ABB ACS880 N5700 Series, Firmware Manual, Page: 290 / 662

Def / Type
FbEq 16b / 32b Description Name / Range /
Selection No.
7 Digital input DI6 ( 10.2 DI delayed status , bit 5). DI6
10 Digital input/output DIO1 ( 11.2 DIO delayed status , bit
0).
DIO1
11 Digital input/output DIO2 ( 11.2 DIO delayed status , bit
1).
DIO2
See Terms and abbreviations (page 130) . Other [bit]
0.0 % / real32 Defines the reference used in speed controller output
balancing. The output of the speed controller is forced
to this value when balancing is enabled by parameter
25.9 Speed ctrl balancing enable .
Speed ctrl balancing
ref 25.10
- / - Speed control output balancing reference. For scaling,
see parameter
46.3 .
-300.0 ... 300.0 %
-300.0 % / real32 Defines the minimum speed controller output torque. Speed control min
torque 25.11
- / - Minimum speed controller output torque. For scaling,
see parameter
46.3 .
-1600.0 ... 0.0 %
300.0 % / real32 Defines the maximum speed controller output torque. Speed control max
torque 25.12
- / - Maximum speed controller output torque. For scaling,
see parameter
46.3 .
0.0 ... 1600.0 %
-400.0 % / real32 Defines the minimum speed controller output torque
during a ramped emergency stop (Off1 or Off3). Min torq sp ctrl em
stop 25.13
- / - Minimum speed controller output torque for ramped
emergency stop. For scaling, see parameter
46.3 .
-1600.0 ... 0.0 %
400.0 % / real32 Defines the maximum speed controller output torque
during a ramped emergency stop (Off1 or Off3). Max torq sp ctrl em
stop 25.14
- / - Maximum speed controller output torque for ramped
emergency stop. For scaling, see parameter
46.3 .
0.0 ... 1600.0 %
10.00; 5.00 (95.21
b1/b2) / real32 Defines the proportional gain for the speed controller
when an emergency stop is active. See parameter
25.2
Speed proportional gain .
Proportional gain
em stop 25.15
- / - Proportional gain upon an emergency stop. 1.00 ... 250.00
290 Parameters