ABB ACS880 N5700 Series, Firmware Manual, Page: 410 / 662

Def / Type
FbEq 16b / 32b Description Name / Range /
Selection No.
1 The master can only be started if all followers are ready
to operate (bit 1 of
6.11 Main status word in each
follower is on).
MSW bit 1
2 The master can only be started if all followers are ready
to switch on and ready to operate (bits 0 and 1 of
6.11
Main status word in each follower are on).
MSW bits 0 + 1
3 The starting of the master is not interlocked to the
status of the followers. Always
4 The master can only be started if user-definable bit 12
of
6.11 Main status word in each follower is on. See
parameter 6.31 MSW bit 12 sel .
MSW bit 12
5 The master can only be started if both bit 0 and bit 12
of
6.11 Main status word in each follower are on.
MSW bits 0 + 12
6 The master can only be started if both bit 1 and bit 12
of
6.11 Main status word in each follower are on.
MSW bits 1 + 12
- / uint16 Parameters 60.19 … 60.28 are only effective when the
drive is the master on a D2D (drive-to-drive) link,
implemented by application programming. See
parameters
60.1 M/F communication port and 60.3
M/F mode , and Drive (IEC 61131-3) application
programming manual (3AUA0000127808 [English]).
In the master, parameters
60.19 M/F comm supervision
sel 1 and 60.20 M/F comm supervision sel 2 specify the
followers that are monitored for loss of communication.
This parameter selects which followers (out of followers
1…16) are monitored. Each of the selected followers is
polled by the master. If no reply is received, the action
specified in
60.9 M/F comm loss function is taken.
The status of communication is shown by 62.37 M/F
communication status 1 and 62.38 M/F communication
status 2 .
M/F comm
supervision sel 1 60.19
1 = Follower 1 is polled by the master. Follower 1 b0
1 = Follower 2 is polled by the master. Follower 2 b1
1 = Follower 3 is polled by the master. Follower 3 b2
1 = Follower 4 is polled by the master. Follower 4 b3
1 = Follower 5 is polled by the master. Follower 5 b4
1 = Follower 6 is polled by the master. Follower 6 b5
1 = Follower 7 is polled by the master. Follower 7 b6
1 = Follower 8 is polled by the master. Follower 8 b7
1 = Follower 9 is polled by the master. Follower 9 b8
1 = Follower 10 is polled by the master. Follower 10 b9
1 = Follower 11 is polled by the master. Follower 11 b10
1 = Follower 12 is polled by the master. Follower 12 b11
1 = Follower 13 is polled by the master. Follower 13 b12
1 = Follower 14 is polled by the master. Follower 14 b13
410 Parameters