York Millennium YCAJ150, Установка, эксплуатация и обслуживание, Страница: 10 / 116

10 YORK INTERNATIONAL
DIMENSIONS
(English)
LD01192
LD01193
LD01194
LD01195
CHILLER X
J150 1'–5"
J160 1'–5"
J180 1'–6"
J190 1'–6"
J200 1'–6-1/2"
J220 1'–6-1/2"
J230 1'–6-1/2"
WEIGHT DISTRIBUTION (LBS.)
WATER
CONN.
MODEL YCA
INLET/OUTLET
A B C D E F G H
DIA. (INCHES)
J150 1791 1813 1843 2130 1738 1872 1893 2011 8
J160 1883 1915 1951 2228 1804 1948 1976 2089 8
J180 1939 1984 2000 2265 1979 2181 2197 2252 8
J190 1939 1984 2002 2272 1979 2181 2199 2259 8
J200 2025 2078 2093 2366 2125 2361 2377 2419 8
J220 2025 2078 2093 2366 2125 2361 2377 2419 8
J230 2094 2147 2163 2441 2156 2393 2435 2461 8
NOTES:
1. Clearances – Recommended YORK clearances for peak per-
formance, reliable operation, and maintenance: Side to wall – 8';
Rear to wall – 8'; Control panel end to wall – 5'; Over the top –
no obstructions allowed; Two units side by side – 12', (walls
should be no higher than the unit). The area within the clearances
and under the unit(s) must be kept clean of clutter. Additional
height should be included to allow for snow accumulation for
units which are expected to operate at full load during the winter.
Reduced clearances may be used due to jobsite restrictions.
The unit(s) with optional controls will allow optimal operation pre-
venting the condenser pressure from exceeding the maximum
limit. The units will continue to operate without nuisance high
pressure cutout even though the airflow may be restricted at
these conditions.
2. Panel bottom to be punched in field to accommodate power wir-
ing conduit.
3. Use of isolators (optional) will increase height of unit approxi-
mately 6".
4. Drawings not to scale and are for planning purposes only. Con-
tact nearest YORK Sales Office for detailed drawings.
CAUTION
FAILURE TO HEED ABOVE RECOMMENDED CLEARANCES MAY RESULT IN
REDUCED SYSTEM PERFORMANCE, NUISANCE SHUTDOWNS, AND SERVICE PROBLEMS.