YASKAWA SGDV SERVOPACK, Руководство пользователя

Страница: 116 / 398

www.dadehpardazan.ir 88594014-15
4.5 Test Without Motor Function
4-13
4
Tria
l Ope
ra
ti
o
n
4.5.4
Operator Displays during Testing without Motor
The status display changes as shown below to show that the test without a motor is being executed.
(1) Display on Panel Operator

The test without a motor operation in progress is indicated with tSt .
Note: The test without a motor status is not displayed during alarm occurs (A.

).
(2) Display on Digital Operator
An asterisk (

) is displayed before status display to indicate the test without a motor operation is in progress.
(Example: Status of power to the servomotor is OFF)
Note: The test without a motor status is not displayed during alarm occurs (A.

).
Display Status
run
⇔
tSt Power is supplied to the servomotor.
bb
⇔
tSt Power to the servomotor is OFF.
P-dt
⇔
tSt
The polarity is being detected.
Pot
⇒
not
⇒
tSt Forward or reverse run is prohibited.
Pot
⇔
tSt Forward run is prohibited.
not
⇔
tSt
Reverse run is prohibited.
Hbb
⇔
tSt In hard-wire base block (safety) state.
Displayed alternately
Analog
Display Status
*RUN Power is supplied to the servomotor.
*BB
Power to the servomotor is OFF.
*P DET The polarity is being detected.
*PT NT
Forward or reverse run is prohibited.
*P-OT Forward run is prohibited.
*N-OT
Reverse run is prohibited.
*HBB In hard-wire base block (safety) state.
∗
B B
−
P R M / M O N
−
U n 0 0 0 = 0 0 0 0 0 0
U n 0 0 2 = 0 0 0 0 0 0
U n 0 0 8 = 0 0 0 0 0 0 0 0 0 0 0
U n 0 0 D = 0 0 0 0 0 0 0 0 0 0 0