page A – 55
WheatNet-IP
/ Mar 2014
A P P E N D I C E S
Setting Up Meters
Until you start working with the meters you see a default layout with no working
meters. So let’s get a meter playing.
Configuring A Meter Cell
Right-click in the first meter cell and select Configure...
from the popup menu.
Change Meter Style: to Basic Bars. Now pick a signal from your system that you
want to display. First choose either the Source or Destination tab, depending on which
signal type you want to display, then click the set button (labeled with three dots) and
double-click the desired signal name in the list that appears. Give the meter a descriptive
Label: and keep the other settings at their defaults. Click Okay.
You should see the meter running in the first meter cell, and it will show any audio
present on that signal.
If you right-click on the same meter cell and select Zoom In... from the popup you will
see that individual meter cell in a full screen display. Right-click in the full screen display
and select Close in the popup to go back to the normal view.
Note that you can also configure a meter cell to show a graphic, such as a station logo,
or even a picture of you, or your boss, or even a pet.
Go ahead and configure a few more cells. Here’s the standard layout on a typical system
with a few meters configured:
Содержание WheatNet-IP Blade3s
Страница 2: ...TECHNICAL MANUAL Wheatstone Corporation April 2009 AUDIO OVER IP NETWORK WheatNet IP ...
Страница 13: ...Quick Start 7 WheatNet IP Apr 2009 Figure 4 ...
Страница 224: ...A P P E N D I C E S page A 34 WheatNet IP Apr 2009 Appendix 5 Contents External Controllers A 35 ...
Страница 238: ...page A 48 WheatNet IP Mar 2014 A P P E N D I C E S Click Next Click Install ...