Wheatstone Corporation WheatNet-IP Blade3s, Техническое руководство

Страница: 44 / 283

G E N E R A L I N F O R M A T I O N
page 1 – 22
WheatNet-IP / Aug 2011
page 1 – 21
Digital 1-8 RJ-45
RJ-45#1 Pin 1 – HI
RJ-45#1 Pin 2 – LO
RJ-45#2 Pin 1 – HI
RJ-45#2 Pin 2 – LO
RJ-45#3 Pin 1 – HI
RJ-45#3 Pin 2 – LO
RJ-45#4 Pin 1 – HI
RJ-45#4 Pin 2 – LO
RJ-45#5 Pin 1 – HI
RJ-45#5 Pin 2 – LO
RJ-45#6 Pin 1 – HI
RJ-45#6 Pin 2 – LO
RJ-45#7 Pin 1 – HI
RJ-45#7 Pin 2 – LO
RJ-45#8 Pin 1 – HI
RJ-45#8 Pin 2 – LO
Model 88ad
I
nputs
The WheatNet-IP 88ad is fed from a combination of analog and digital inputs
via two DB-25 or eight RJ-45 connectors.
The digital inputs of the WheatNet-IP 88ad (inputs 5-8) will accommodate
digital inputs having a wide range of sample rates. These inputs will be sample
rate converted to the system’s chosen sample rate of 44.1kHz or 48kHz, which is
set via the WheatNet-IP Navigator GUI. The GUI also allows you to select input
8 of the digital BLADE, or of any BLADE that has a digital input as input 8, to be
a primary external reference, and a digital input 8 from a different BLADE to be a
secondary external reference. Please note that the sample rate of a digital input 8
should be the same, either 44.1kHz or 48kHz, as the system’s chosen sample rate.
AES sources are by design stereo; if the BLADE is not set to be stereo the
appropriate Left or Right signal within the AES stream will be applied to the
signal path.
Analog 1-4 DB-25
Pin 24 – HI
Pin 12 – LO Line 1 Lt In
Pin 25 – SH
Pin 10 – HI
Pin 23 – LO Line 1 Rt In
Pin 11 – SH
AES 4 Out
AES 5 Out
AES 6 Out
AES 7 Out
AES 8 Out
AES 1 Out
AES 2 Out
AES 3 Out
WheatNet-IP / Oct 2012