Waygate Technologies Krautkramer USM 100, Руководство по эксплуатации, Страница: 224 / 330

5 Operation Scan Setup
224 Rev. 9 (09/2023) Krautkrämer USM 100
Encoder Dir. X
This is the same function as in the function group
Encoder Cal (see page 214).
Encoder Dir. Y
This is the same function as in the function group
Encoder Cal (see page 214).
Encoder Res. X
This is the same function as in the function group
Encoder Cal (see page 215).
Encoder Res. Y
This is the same function as in the function group
Encoder Cal (see page 215).
Active Scan Start
You can set the starting point on the scan axis (X-axis)
of the active C-scan (see page 218). independently of
the C-scan. You can also change this setting after a
scan has been acquired in order to display an enlarged
area in the active C-scan for evaluation (see page 235).
This setting is locked during the scan.
Active Scan End
You can set the end point on the scan axis (X-axis) of
the active C-scan (see page 218). independently of the
C-scan. You can also change this setting after a scan
has been acquired in order to display an enlarged area
in the active C-scan for evaluation (see page 235). This
setting is locked during the scan.