Waygate Technologies Krautkramer USM 100 Скачать руководство пользователя страница 214

Страница: 214 / 330

5 Operation

Encoder Cal

214

Rev. 9 (09/2023)

Krautkrämer USM 100

Encoder Type

You must select the encoder type depending on the
scanner system you are using and the encoders in-
stalled.

Select

Directional

Quadrature

for each axis de-

pending on the encoder. One can be used for the scan
axis, the other for the index axis.

Encoder Axis

You must select which axis is equipped with an encoder.
The standard setting is

Scan

(one encoder for the scan

axis). Select

Both

for systems with two encoders, one

for the scan axis and one for the index axis.

Encoder Dir. X

Set the moving direction of the encoder on the X-axis.

Normal

The moving on the scan axis is from left to right.

Reversed

The moving on the scan axis is from right to left.

Encoder Dir. Y

Normal

The moving on the index axis is from the bottom to the
top.

Reversed

The moving on the index axis is from the top to the bot-
tom.

Содержание Krautkramer USM 100










































































































































































































































































































































Результаты поиска

Содержание Krautkramer USM 100

Отзывы:

Waygate Technologies Krautkramer USM 100, Руководство по эксплуатации, Страница: 214 / 330

Результаты поиска

Содержание Krautkramer USM 100

Отзывы: