Waygate Technologies Krautkramer USM 100, Руководство по эксплуатации, Страница: 132 / 330

5 Operation Material Probe
132 Rev. 9 (09/2023) Krautkrämer USM 100
Thickness
You can use this function to set the wall thickness of the
test object. This value is required for the automatic cal-
culation of the true depth of a reflection.
Outer diameter
This function is only visible if you have selected the
Curved option for Part Type (see page 131).
Enter the outside diameter of your test object to make
the instrument carry out the corresponding correction of
the (reduced) projection distance and depth.
Probe Selection
By selecting the order number of the connected probe,
you can quickly and correctly set the settings (name,
probe delay, element diameter, and frequency) stored
together with the number for the probe. The probe num-
ber
000-000-000 is user programmable with regard to
all parameters.
Alternatively, you can select the probe by its name (see
Probe Name ).
Probe Name
By selecting the name of the connected probe, you can
quickly and correctly set the settings (name, probe de-
lay, element diameter, and frequency) stored together
with the name for the probe. The probe name
Custom
is user programmable with regard to all parameters.
Alternatively, you can select the probe by its number
(see
Probe Selection ).