manualshive.com logo in svg

Waygate Technologies Krautkramer USM 100, Руководство по эксплуатации, Страница: 147 / 330

Поделиться
Скачать
Waygate Technologies Krautkramer USM 100 Скачать руководство пользователя страница 147

Gates

5  Operation

Krautkrämer USM 100

Rev. 9 (09/2023)

147

Gate A TOF Mode

This function can also be set for gate B, C and IF. 

The sound path measurement by means of the echo 
evaluation depends on the choice of the measuring 
point. 

ATTENTION

In any case, the setting of the measuring 
point for the calibration and for the subse-
quent test use must always be identical. Oth-
erwise, measuring errors may occur.

Note

The highest echo in the gate does not have 
to be identical with the echo for which the 
sound path is measured. This can lead to 
evaluation errors!

Two measurement arrows are used in order to clearly 
identify readings and to avoid any misinterpretations. 
The display shows 

●

the position at which the sound path (distance) is 
measured: arrowhead downwards, and 

●

where the amplitude is measured: arrowhead up-
wards.

In addition to the measurement reading, the TOF mode 
measuring point (peak or flank) is displayed with a sym-
bol in the measurement line in sound path measure-
ments:

^ = measuring point Peak

/ = measuring point Flank

Examples: 

SA^

 = sound path within gate A, measuring point Peak

SA/

 = sound path within gate A, measuring point Flank

Содержание Krautkramer USM 100











































































































































































































































































































































Отзывы:

Нет отзывов