58
Functions
WAGO-I/O-SYSTEM 750
753-668/000-004 4FAI 0/4-20 mA Diff PROFIsafe
Manual
Version 1.0.0, valid from HW/SW Version 01/01
4.7
Setting the Relative or Absolute Tolerance
Depending on which setting is used for the tolerance window (relative, absolute
or re absolute), the relative or absolute parameter values must be set.
The settings are made via the “
Relative Tolerance
” parameter and/or “
Absolute
Tolerance
”, which is described in Section “Commissioning” > … > “Setting
Parameters”.
The following parameters must also be set:
•
Tolerance window
•
Sensor evaluation
•
Discrepancy time