Volkswagen CC 2012, Руководство по ремонту

Страница: 81 / 222

2 Cover for timing chain
⇒ “2.1 Assembly overview - cover for timing chain”, page 75
⇒ “2.2 Removing and installing timing chain cover”, page 76
⇒ “2.3 Removing and installing the camshaft control valve seal”,
page 78
⇒ “2.4 Assembly overview - valve timing housing”, page 79
2.1 Assembly overview - cover for timing
chain
⇒ “4.5 Removing and installing camshaft control valve”,
page 112
1 - Sealing ring
❑ For crankshaft
❑ Renewing
⇒ page 37
2 - Lower cover for timing chain
❑ Gearbox side
❑ Removing and installing
⇒ page 76
3 - Bolt
❑ 23 Nm
4 - Bolt
❑ Tighten in stages and in
diagonal sequence.
❑ 8 Nm
5 - Sealing ring
❑ Qty. 2
❑ For camshaft control
valve 1 - N205- and ex‐
haust camshaft control
valve 1 - N318-
❑ Renew if leaking or
damaged.
❑ Renewing ⇒ page 78
6 - Bolt
❑ 8 Nm
7 - Hall sender
❑ Hall sender - G40- and
Hall sender 2 - G163-
8 - O-ring
❑ Qty. 2
❑ Renew
9 - Dowel pins
❑ Qty. 2
10 - Upper cover for timing chain
11 - Cylinder head gasket
❑ Clean drillings and fill with sealant ⇒ page 76 .
CC 2012 ➤ , Passat 2011 ➤ , Passat Variant 2011 ➤
6-cylinder direct-injection engine (3.6 l engine, 4V) - Edition 06.2019
2. Cover for timing chain
75