Viessmann VITOCAL 200-G, Инструкция по установке и обслуживанию

Страница: 192 / 208

Setting parameters Setting range Standard
setting Commission-
ing
Power-OFF No/Yes Yes
Electric heating No/Yes Yes
DHW with electric No/Yes Yes
Max. flow temperature 5 to 75 °C 65 °C
Heater rod delay 0:00 to 5:00 h 0:30 h
Electric heating
threshold 10 to 30000 K
∙
min 300 K
∙
min
E-heating max. stage 1 to 3 3
Internal hydraulics
Heat pump for drying
buildings No/Yes No
Time for drying build-
ings 0 to 30 days 0 days
("Off")
Flow hysteresis 0.5 to 5.0 K 2.0 K
Internal pump run-on 00:10 to 05:00 min 02:00 min-
utes
Max. steps, three-way
valve -30000 to 30000 320
DHW
DHW cylinder tem-
perature 10 to 70 °C 50 °C
DHW program tem-
perature Seven-day program OFF
DHW circulation pump
program Seven-day program OFF
Operating mode
0 to 6 * 1
4
DHW cylinder max. 20 to 80 °C 60 °C
Hysteresis, DHW elec-
tric heating 2 to 30 K 10 K
Hysteresis 1 to 10 K 7 K
Start optimisation No/Yes Yes
Stop optimisation No/Yes Yes
Auxiliary DHW func-
tion No/Yes No
Set DHW temperature 10 to 70 °C 60 °C
Cylinder volume for
HP No/Yes Yes
Control parameter report
(cont.)
192
Commissioning/service reports
55
92
968
GB
*1
0: Standby; 1: Reduced; 2: Standard; 3: Fixed value; 4: Rotary selector; 5: External;
6: Switching times.