Viessmann VITOCAL 200-G, Инструкция по установке и обслуживанию

Страница: 193 / 208

Setting parameters Setting range Standard
setting Commission-
ing
Excess reaction
0 to 2 * 1
2
Max. DHW runtime 00:10 to 24:00 h 04:00 h
Max. DHW interruption 00:10 to 24:00 h 01:30 h
Heating circuit
Standard temperature 10 to 30 °C 20 °C
Reduced temperature 10 to 30 °C 14 °C
Temp. program HC Seven-day program OFF
Remote control No/Yes No
Operating mode
0 to 7
* 2
4
Max. flow temperature 10 to 70 °C 40 °C
Min. flow temperature 1 to 30 °C 10 °C
DHW during party
mode No/Yes Yes
Excess reaction
0 to 2 * 1
2
Room temperature
sensor No/Yes No
Slope, room tempera-
ture hook-up 0 to 10 10
Room temperature
hook-up
0 to 3
* 3
0
Start optimisation No/Yes No
Max. flow correction 0.1 to 10.0 K 10.0 K
Room temperature
control No/Yes No
Heating curve level -15 to 40 K 0 K
Heating curve slope 0.0 to 3.5 0.6
Integral room tempera-
ture controller 5 to 1000 100
Flow T excess -10 to 40 K 0 K
Mixer runtime 0:05 to 4:15 min 0:10 minutes
Mixer parameters 0/1 0
Screed function 0 to 15 0 (passive)
Mixer active zone 2 to 40 K 4 K
Mixer dead zone 0.5 to 3 K 1 K
Natural cooling No/Yes No
Control parameter report
(cont.)
193
Commissioning/service reports
55
92
968
GB
Service
*1
0: no reaction; 1: Draw-off only in case of critical excess; 2: Always draw-off.
*2
0: Standby; 1: Reduced; 2: Standard; 3: Fixed value (at max. flow temperature); 4: Rotary
selector; 5: External (no function); 6: Switching times; 7: Remote control.
*3
0: never; 1: only reduced mode; 2: only standard mode; 3: in reduced and in standard
mode.