Viessmann VITOCAL 200-G, Инструкция по установке и обслуживанию

Страница: 169 / 208

Note
This function is only available for system design 2 .
When selecting system designs 4 and 6, the buffer cylinder will be defined auto-
matically as a system component.
Should a heating water buffer cylinder be part of a system in accordance with
design 2, either set it through selecting option "
Yes ", or via the system config-
uration (see page 103) or system definition (see page 134).
Access
& " Device settings "
& " Programming "
& " Further menu items "
& " Buffer cylinder "
& "Buffer cylinder" (" YES "/" NO ")
Standard setting NO
Setting range YES/NO
Buffer cylinder program
Note
This function is only available in case of system design 2 , if the option " Yes "
was selected under " Buffer cylinder " (see page 169).
Operating instructions
Fixed temperature
Note
This function is only available in case of system design 2 , if the option " Yes "
was selected under " Buffer cylinder " (see page 169).
The temperature cannot be set higher than that selected under " Max. tempera-
ture " (see page 170).
Setting of the temperature to which the heating water buffer cylinder is heated, if
it is to be heated up and if the "
Fixed value " program was selected under
" Buffer cylinder prog. " (see operating instructions).
Buffer cylinder
169
Buffer cylinder control settings
55
92
968
GB
Service