Viessmann VITOCAL 200-G, Инструкция по установке и обслуживанию

Страница: 157 / 208

Access
& " Device settings "
& " Programming "
& " Heating circuit "
& " Heating circuit 1/2 "
& "Excess reaction"
(
l
/
m
)
Standard setting 2
Setting range 0 to 2
Room temperature sensor
If a room temperature sensor is installed, it must be activated for the relevant
heating circuit.
For more information on the use of room temperature sensors and remote con-
trols, see page 77.
Access
& " Device settings "
& " Programming "
& " Heating circuit "
& " Heating circuit 1/2 "
& "Room temperature sensor"
(" YES "/" NO ")
Standard setting NO
Setting range YES/NO
Slope; room temperature hook-up
The slope for room temperature hook-up can be selected, subject to a room
temperature sensor being installed and enabled and room temperature hook-up
being enabled (see page 158).
The higher the selected value, the greater the influence of the room tempera-
ture.
Access
&
" Device settings "
&
" Programming "
&
" Heating circuit "
&
" Heating circuit 1/2 "
&
"Heat. room hook-up"
(
l
/
m
)
Standard setting 10
Setting range 0 to 10
Excess reaction
(cont.)
157
Heating circuit control settings
55
92
968
GB
Service