Vaillant VRC 630, Руководство по эксплуатации

Страница: 39 / 152

Operation 5
Operating manual VRC 630 0020095108_00
37
5.10.2 Activating the Advance function
When you activate the Advance function, the heating
and hot water times are extended beyond the next
switch-off point to the start of the next heating period,
i.e. the actual settings for the heating are temporarily
overridden. The Advance function only affects those
heating or hot water circuits which are set to
Auto or
ECO mode.
Wed 02.12.09 15:43 -3 °C
HK1 Heating 22 °C
Storey 1 Eco 18°C
Cylinder Auto 60 °C
VRC 630
Check that the Auto or Eco mode is set for the hea-
ting circuit and DHW cylinder.
If this is not the case, set the mode to
Auto or Eco
( ¬ Chap. 5.2.1 ).
Press the left-hand dial twice.
Wed 02.12.09 15:43 -3 °C
Room temperature 21°C
Advance function enabled
VRC 630
The controller shows the menu for the Advance func-
tion. The Advance function is activated. No settings are
necessary.
When the last heating circuit starts to heat again
(switch from set-back to heating), the Advance function
is ended automatically and the controller switches to
the basic display.
Interrupting the Advance function
Press the left-hand dial twice.
The controller ends the Advance function and switches
to the basic display.
>
>
>
>
5.10.3 Activating the One-time cylinder charging
function
The One-time Cylinder Charging function allows you to
charge the DHW cylinder once, regardless of the current
timer programme.
Wed 02.12.09 15:43 -3 °C
HK1 Heating 22 °C
storey 1 Eco 18°C
Cylinder Auto 60 °C
VRC 630
Press the left-hand dial three times.
Wed 02.12.09 15:43 -3 °C
Room temperature 21°C
One-time Cylinder Charging
activated
VRC 630
The controller shows the menu for One-time cylinder
charging . The One-time cylinder charging function is
activated. No settings are necessary.
When the water in the cylinder has been heated to the
set temperature, the function is ended automatically
and the controller switches to the basic display.
i
The hot water temperature is defined by the
expert technician when commissioning your
heating installation.
Interrupting One-time cylinder charging
Press the left-hand dial once.
The controller ends the One-time cylinder charging
and switches to the basic display.
>
>