Vaillant VRC 630, Руководство по эксплуатации

Страница: 22 / 152

The procedure for setting the operating mode in the
basic display is explained in the following, using the
cylinder as an example.
Wed 02.12.09 15:43 -3 °C
HK1 Heating 22 °C
storey 1 Eco 20 °C
storey 2 Auto 15 °C
Cylinder Auto 55°C
VRC 630
Turn the right hand dial until the cursor is flashing
in front of the Auto mode ( Cylinder line).
Wed 02.12.09 15:43 -3 °C
HK1 Heating 22 °C
storey 1 Eco 20 °C
storey 2 Auto 15 °C
Cylinder Auto 55°C
VRC 630
Press the right hand dial.
The operating mode is marked.
Wed 02.12.09 15:43 -3 °C
HK1 Heating 22 °C
Storey 1 Eco 20 °C
Storey 2 Auto 15 °C
Cylinder Off 55°C
Select mode
Turn the right hand dial until the desired operating
mode appears on the display.
Wed 02.12.09 15:43 -3 °C
HK1 Heating 22 °C
Storey 1 Eco 20 °C
Storey 2 Auto 15 °C
Cylinder Off 55°C
VRC 630
Press the right hand dial.
The operating mode is saved and takes effect.
>
>
>
>
i
If you want to change the operating mode for
further heating and circulation circuits / DHW
cylinders, turn the dial until the cursor
is
positioned in the appropriate line in front of
the mode to be changed. Repeat the steps
described above.
5.2.2 Setting the target room temperature using
heating circuit HK1 as an example
The target room temperature is used to calculate the
heating curve.
If you increase the required room temperature, the set
heating curve is moved parallel to a 45° axis and cor-
respondingly also the flow temperature to be regulated
by the controller (
¬ Fig. 3.4 ).
Wed 02.12.09 15:43 -3 °C
HK1 Heating 22 °C
Storey 1 Eco 20 °C
Storey 2 Auto 15 °C
Cylinder Auto 55°C
VRC 630
Turn the right hand dial until the cursor is flashing
in front of the target room temperature (22 °C in
the example).
Wed 02.12.09 15:43 -3 °C
HK1 Heating 22 °C
Storey 1 Eco 20 °C
Storey 2 Auto 15 °C
Cylinder Auto 55°C
>Select target room temperature
Press the right hand dial.
The target room temperature is marked.
>
>
5 Operation
20
Operating manual VRC 630 0020095108_00