manualshive.com logo in svg

Vacon NX, Руководство пользователя

Vacon NX - это мощный преобразователь частоты, предоставляющий быструю помощь с помощью бесплатного руководства. Скачайте руководство с нашего сайта для получения подробной информации о продукте. {Website} - ваш источник полезных ресурсов для вашего оборудования.

Поделиться
Скачать
background image

7

vacon • 122

Control keypad

Local contacts: http://drives.danfoss.com/danfoss-drives/local-contacts/

7.3.2

Parameter menu (M2)

Parameters are the way of conveying the commands of the user to the AC drive. The parameter 
values can be edited by entering the Parameter Menu  from the Main Menu when the location 
indication M2 is visible on the first line of the display. The value editing procedure is presented in 
Figure 64.

Push the Menu button right once to move into the Parameter Group Menu (G#). Locate the 
parameter group desired by using the Browser buttons  and push the Menu button right  again to 
enter the group and its parameters. Use again the Browser buttons  to find the parameter (P#)  you 
want to edit. From here you can proceed in two different ways: Pushing the Menu button right  takes 
you to the edit mode. As a sign of this, the parameter value starts to blink. You can now change the 
value in two different manners:

1.

Just set the new desired value with the Browser buttons and confirm the change with the 
Enter button. Consequently, the blinking stops and the new value is visible in the value 
field.

2.

Push the Menu button right  once again. Now you will be able to edit the value digit by 
digit. This editing manner may come in handy, when a relatively greater or smaller value 
than that on the display is desired. Confirm the change with the Enter button.

The value will not change unless the Enter button is pushed. Pressing the Menu button left  takes 
you back to the previous menu.

Several parameters are locked, i.e. uneditable, when the drive is in RUN status. If you try to change 
the value of such a parameter the text *Locked*  will appear on the display. The AC drive must be 
stopped in order to edit these parameters.

The parameters values can also be locked using the function in menu M6 (see Chapter Parameter 
lock (P6.5.2)).

You can return to the Main menu anytime by pressing the Menu button left  for 3 seconds.

The basic application package "All in One+" includes seven applications with different sets of 
parameters.

Once in the last parameter of a parameter group, you can move directly to the first parameter of that 
group by pushing the Browser button up.

See the diagram for parameter value change procedure on page 123.

Содержание NX
















































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для NX

Lawler 61 Series Installation & Maintenance Manual preview
61 Series
Бренд: Lawler Страницы: 4
Hama 11412 Operating Instruction preview
11412
Бренд: Hama Страницы: 46
Galcon 61 Series Installation And Operating Instructions Manual preview
61 Series
Бренд: Galcon Страницы: 35
YOKOGAWA CX1000 Installation And Connection Manual preview
CX1000
Бренд: YOKOGAWA Страницы: 2
Halma ALICAT SCIENTIFIC PC Quick Start Manual preview
ALICAT SCIENTIFIC PC
Бренд: Halma Страницы: 2
Halma ALICAT SCIENTIFIC PCD Operating Manual preview
ALICAT SCIENTIFIC PCD
Бренд: Halma Страницы: 46
Paradox Digiplex DGP-848 Reference And Installation Manual preview
Digiplex DGP-848
Бренд: Paradox Страницы: 20
Paradox PCS300 Reference And Installation Manual preview
PCS300
Бренд: Paradox Страницы: 32
ValvTechnologies V1 Series Installation And Operations Maintenance Manual preview
V1 Series
Бренд: ValvTechnologies Страницы: 20
IBC MVE2 Series Quick Start Manual preview
MVE2 Series
Бренд: IBC Страницы: 8
Finnleo SaunaLogic SL2 Control Manual preview
SaunaLogic SL2 Control
Бренд: Finnleo Страницы: 14
IBCcontrol MicroMax180 Manual preview
MicroMax180
Бренд: IBCcontrol Страницы: 16
HORI 4961818031043 Instruction Manual preview
4961818031043
Бренд: HORI Страницы: 60
Watts WFHC 06Z 02 HC RF 24 User Manual preview
WFHC 06Z 02 HC RF 24
Бренд: Watts Страницы: 18
Waters Bus SAT/IN Installation Manual preview
Bus SAT/IN
Бренд: Waters Страницы: 39
Dahua Technology DHI-IPMECD-3021 Series User Manual preview
DHI-IPMECD-3021 Series
Бренд: Dahua Technology Страницы: 28
Texas Instruments Errata MSP430F6779 Manual preview
Errata MSP430F6779
Бренд: Texas Instruments Страницы: 27
Sames Inocoat Inobox Instruction Manual preview
Inocoat Inobox
Бренд: Sames Страницы: 84

Бренды по названию

Популярные бренды

Загрузить еще бренды