URAL Motorcycles URAL-4320-60, Руководство по эксплуатации

Страница: 56 / 267

55
1-intermediate cardan shaft; 2,4,5-winch drive cardan shaft; 3-winch drive intermediate support; 6-rear ax-
le drive cardan shaft; 7-front axle drive cardan shaft
Fig. 35 - Transmission and winch drive cardan shaft layout
(for 4 х 4 trucks)
When operating the truck:
- check regularly the fastening of the cardan shaft flanges (Fig. 37 and 38);
- should radial clearance exceed 0.25 mm, and end clearances 0.35 mm in the spider
bearings, disassemble the cardan joints and replace the spider bearings, if necessary. When disas-
sembling, take care not to damage the packings; replace damaged packings.
1-face seal; 2-crosspiece; 3-needle bearing
Fig. 36 - Needle bearing integrated seal