URAL Motorcycles URAL-4320-60, Руководство по эксплуатации

Страница: 251 / 267

250
Rotary valve and torsion bar, torsion bar and worm are drilled together and fixed by pins
8 and 13. When no effort is applied to the steering wheel the torsion bar keeps the rotary valve in
the neutral position. When an effort is applied to the steering wheel the torsion bar twists and
turns the slide valve in the direction of the corresponding dosing grooves.
1-rotary valve; 2, 8-plugs; 3,7-pressure limitation adjusting screws; 4,6- pressure limitation valves; 5-balls;
9-piston; 10, 15-pins; 11-
torsion bar
; 12-arm shaft (sector); 13-worm; 14-valves case
Fig. I.6 – Steering gear
The oil from the pump flows into one of the piston cavities of the steering mechanism
depending on the direction of rotation and increases the drop arm rotational movement through
hydraulic pressure on piston surface.
Turning of the rotary valve relative to worm head is limited by stops.
1-pump; 2-oil tank; 3-filler neck plug; 4-
steering gear; a-feed; b,-pumping;
с -drain;
d-clockwise rotation of the shaft (example)
Fig. I.5 – Hydraulic circuit of the steering
(hydraulic booster)