URAL Motorcycles URAL-4320-60, Руководство по эксплуатации

Страница: 143 / 267

142
1- hose for windshield blowing with warm air; 2-exterior hatch control lever; 3-air heating dispenser; 4-
flap control lever of air heating dispenser; 5-interior hatch control lever; 6-motor and fan assembly; 7-
interior hatch cover; 8-heat radiator; 9-heat radiator water outlet pipe; 10-water-supply pipe; 11-cock; 12-
exterior hatch cover; 13-deflector
Figure 117 - Cab Heater and Windshield Blowing Diagram
5.7.1.4 The driver’s and passengers’ seats are of separate design; they have rubber
belts as shock-absorbing elements.
The limit of forward and backward adjustment is 110 mm. The seat is fixed in the desired
position by handle (as shown in Fig. 118) provided at the left side of the seat support. The driver’s
seat has a mechanism used for changing seat cushion inclination and position of the seat in height
with the limits of adjustment up to 80 mm. To change the position of the seat in height, turn out
two front screws 1 on the left and right sides of the seat. Upon setting the desired height of its
front part, turn in these screws by several turns, but not tightly, slacken the seat rear part by turn-
ing out two screws 3 by four or five turns.
1,3-seat height and inclination adjusting
screws; 2-seat back-and-forth movement lever;
4-seat backrest angle wing nut
Figure 118 – Driver’s Seat