URAL Motorcycles URAL-4320-60, Руководство по эксплуатации

Страница: 190 / 267

189
Description Technical requirements Recommended equipment,
accessories and tools Wheel ar-
rangement
4 х 4 6 х 6
Check and adjust tapered
bearings of primary and in-
termediate shafts of transfer
case (see subsection «Trans-
fer case »), if required
Every second
M-15 000: primary and in-
termediate
shafts axial
throw is 0,03-0,08 mm
Wrenches 8
х
10, 10
х
12,
11 х 13, 14 х 17, 17 х 19,
22 х 24, socket wrenches
27 х 38 and 41 х 46, combi-
nation pliers, screwdriver,
tire iron, beam crane,
pointer indicator, device
for indicator fastening,
driftpin,
flange puller
group 375-3918050, wip-
ing material
+ +
Adjust the bearings of
steering knuckles pivot (see
subsection «Driving axles »)
Every sixth M-15 000:
thickness of gaskets re-
moved from under the lev-
er and covers should be
the same – 0,15 mm
(0,05+0,1) mm
Box wrench 24x27,
thrust supports under the
lower covers of steering
knuckles, jack, tire iron
+ +
Adjust driving axles final
drives
Every sixth M -15 000.
Technical requirements
and adjustment order see
in subsection «Driving ax-
les»
Wrenches
110 х 12,11 х 13, 17x19,
22x24, 24x27, device for
reduction gears mounting
dismantling,
dynamome-
ter, indicator, pliers,
screwdriver, hammer, tire
iron, axle shaft puller, wip-
ing material
+ +
Check the tightening of
and, if required, retighten
nuts fastening (every second
M-15 000),:
- propeller shaft; Loosening is not admis-
sible
Box wrench 24x27 + +
- steering knuckles lower
and upper covers lever and
ball joints flanges
Ditto
Ditto
+ +
Check tightening of and
retighten bolts and nuts fas-
tening driving axles final
drives if required
Fastening should be
tight
Wrench 22x24, box
wrench 22x24, pliers,
screwdriver
+ +