Page 50
To set the date use the
UP
and
DOWN
keys to change the
blinking digit. Use the
START/ STOP
key to move to the next digit.
When all changes are completed, use the
START/ STOP
key to move
to
SET
, then use the
UP
or
DOWN
key to save the new date and time.
Setting the Date and time will cause the autoclave software to
automatically reload.
5.1.7. Login
Accessing additional feature requires entering a password, follow these steps.
1.
Select Login and press the
START/STOP
key.
2.
The SELECT USER screen is displayed.
3.
Move the c u r s o r t o Use r, i f it is not already highlighted, and press
START/STOP key
4.
Enter Code screen is now displayed.
5.
0000 is displayed on the screen with the cursor blinking on the right
digit.
