Page 43
5.1.
Quick Options Directory
To take advantage of the system features it is necessary to access the
programming mode. Some subdirectories enable the operator to see
and change an individual cycle
’s parameters. Therefore, it is necessary
to choose the required cycle before entering the programming mode.
1. Enter the
programming mode
by pressing the
UP
and
DOWN
keys
simultaneously
for 1-2 seconds. When released the
“Quick
Option
s” screen will be displayed. Scroll up or down the list and press
the
START/STOP
key to select.
Some features will require an access code. The
User’s access code is
0001.
2. To exit this screen or any screen in this section, press the UP or
DOWN key to move the cursor to Exit and press START/STOP key.
5.1.1. Add extra dry time
Accessing this parameter allows the operator to ADD additional drying
time to the default drying time of the cycle selected.
As an example: If the program default is 30 minutes drying selecting 10
additional minutes will give a total drying time of 40 minutes. The
additional drying time will remain as part of the cycle until changed
back. To return to the original 30 minutes, select 0 additional minutes,
now the total drying time will be 30 minutes.
Scroll up or down the list and press the
START/STOP
key to select.
