JUNE 2002 © TOSHIBA TEC
5 - 85
e-STUDIO550/650/810 TROUBLE SHOOTING
[CB6] Abnormal stapler shift motor
Is the stapler shift home position sensor (PI7) working normally?
NO
Replace the sensor.
YES
Is the wiring between the finisher controller PC board and the stapler shift motor (M4) correct?
YES
Correct the wiring.
NO
Is there any mechanical problem with the stapler stand motion path?
YES
Fix the mechanism.
NO
Is the problem solved by replacing the stapler shift motor?
NO
Replace the finisher controller PC board.
YES
END
[CB7] Abnormal height sensor
[Procedure 1]
Is the problem solved by turning the power of the copier OFF and ON?
YES
END
NO
Is the wiring between the finisher controller PC board and the height sensor (PS1) correct?
YES
Correct the wiring.
NO
Is the voltage between J6-2(+) and J6-4(-) on the finisher controller PC board 5V DC?
NO
Replace the finisher controller PC board.
YES
Re-adjust the height sensor. Replace the height sensor if it still causes the problem.
Содержание e-studio550
Страница 115: ...JUNE 2002 TOSHIBA TEC 4 11 e STUDIO550 650 810 PREVENTIVE MAINTENANCE Rear side 20 74 75 32 80 63 44 73 75 53 ...
Страница 309: ...JUNE 2002 TOSHIBA TEC 8 1 e STUDIO550 650 810 WIREHARNESSCONNECTIONDIAGRAMS 8 WIRE HARNESS CONNECTION DIAGRAMS ...
Страница 313: ...1 1 KANDA NISHIKI CHO CHIYODA KU TOKYO 101 8442 JAPAN R02032112000 TTEC ...