e-STUDIO550/650/810 TROUBLE SHOOTING
5 - 40
JUNE 2002 © TOSHIBA TEC
[EA4] Finisher front door opened during printing
Is there any paper remaining on the transport path in the finisher or main unit?
YES
Remove the paper.
NO
Is the finisher connected with the main unit?
NO
Connect the finisher with the main unit.
YES
Is the connector J12 on the finisher controller PC board disconnected?
Is the harness connecting the finisher controller PC board and joint sensor (PI15) open-circuited?
YES
Connect the connector securely. Replace the harness.
NO
Is the joint sensor working properly?
NO
1. Connect the connector of the joint sensor securely.
2. Replace the joint sensor.
YES
Is the door of the finisher closed?
NO
Close the door.
YES
Is the connector J12 on the finisher controller PC board disconnected?
Is the harness connecting the finisher controller PC board and door opening sensor (PI16) open-circuited?
YES
Connect the connector securely. Replace the harness.
NO
Is the door opening sensor working properly?
NO
1. Connect the connector of the door opening sensor securely.
2. Replace the door opening sensor.
YES
Is the connector J5 on the finisher controller PC board disconnected?
Is the harness connecting the finisher controller PC board and door switch (MS1) open-circuited?
YES
Connect the connector securely. Replace the harness.
NO
Содержание e-studio550
Страница 115: ...JUNE 2002 TOSHIBA TEC 4 11 e STUDIO550 650 810 PREVENTIVE MAINTENANCE Rear side 20 74 75 32 80 63 44 73 75 53 ...
Страница 309: ...JUNE 2002 TOSHIBA TEC 8 1 e STUDIO550 650 810 WIREHARNESSCONNECTIONDIAGRAMS 8 WIRE HARNESS CONNECTION DIAGRAMS ...
Страница 313: ...1 1 KANDA NISHIKI CHO CHIYODA KU TOKYO 101 8442 JAPAN R02032112000 TTEC ...