JUNE 2002 © TOSHIBA TEC
5 - 89
e-STUDIO550/650/810 TROUBLE SHOOTING
[CBA] Abnormal saddle stitcher stitch motor (front)
[CBB] Abnormal saddle stitcher stitch motor (rear)
Are the front and rear stitchers and their stands installed properly?
NO
Install them properly.
YES
Are the stitcher home position switches (MS7S/MS5S) on the front and rear stitchers working nor-
mally?
NO
Replace the front or rear stitcher.
YES
Are the front and rear stitchers operating at the fixed timing?
NO
Replace the front or rear stitcher.
YES
Check the wiring between the stitcher and saddle stitcher controller PC board. If there is no problem,
replace the controller PC board.
[CBC] Abnormal saddle stitcher alignment motor
Is the alignment plate home position sensor (PI5S) working normally?
NO
Replace the sensor.
YES
Is the alignment motor (M5S) operating at the fixed timing?
YES
Replace the saddle stitcher controller PC board.
NO
Is the alignment plate drive mechanism normal?
NO
Fix the mechanism.
YES
Is the problem solved by replacing the alignment motor (M5S)?
NO
Replace the saddle stitcher controller PC board.
YES
END
Содержание e-studio550
Страница 115: ...JUNE 2002 TOSHIBA TEC 4 11 e STUDIO550 650 810 PREVENTIVE MAINTENANCE Rear side 20 74 75 32 80 63 44 73 75 53 ...
Страница 309: ...JUNE 2002 TOSHIBA TEC 8 1 e STUDIO550 650 810 WIREHARNESSCONNECTIONDIAGRAMS 8 WIRE HARNESS CONNECTION DIAGRAMS ...
Страница 313: ...1 1 KANDA NISHIKI CHO CHIYODA KU TOKYO 101 8442 JAPAN R02032112000 TTEC ...