e-STUDIO550/650/810 TROUBLE SHOOTING
5 - 42
JUNE 2002 © TOSHIBA TEC
[EA5] Finisher stapling jam
Is there any paper remaining on the transport path in the finisher or main unit, or on the stapling tray?
YES
Remove the paper.
NO
Is the jam cleared by taking off the staple cartridge from the finisher and removing the staple sheet
sliding it from the staple case?
YES
End
NO
Is the connector J8 on the finisher controller PC board disconnected?
Is the harness connecting the finisher controller PC board and staple home position sensor
(PI22) open-circuited?
YES
Connect the connector securely. Replace the harness.
NO
Is the staple home position sensor working properly?
NO
1. Connect the connector of the staple home position sensor securely.
2. Replace the staple home position sensor.
YES
Replace the finisher controller PC board.
Содержание e-studio550
Страница 115: ...JUNE 2002 TOSHIBA TEC 4 11 e STUDIO550 650 810 PREVENTIVE MAINTENANCE Rear side 20 74 75 32 80 63 44 73 75 53 ...
Страница 309: ...JUNE 2002 TOSHIBA TEC 8 1 e STUDIO550 650 810 WIREHARNESSCONNECTIONDIAGRAMS 8 WIRE HARNESS CONNECTION DIAGRAMS ...
Страница 313: ...1 1 KANDA NISHIKI CHO CHIYODA KU TOKYO 101 8442 JAPAN R02032112000 TTEC ...