e-STUDIO550/650/810 TROUBLE SHOOTING
5 - 96
JUNE 2002 © TOSHIBA TEC
[CC4] Abnormal swing motor
[Procedure 1]
Rotate the swing motor in reverse by hand. Does the swing guide move up and down?
NO
Fix the swing mechanism.
YES
Is the swing guide closed detection switch-2 (MS6) working normally?
NO
Replace the switch.
YES
Is the swing guide open sensor (PI18) working normally?
NO
Replace the sensor.
YES
Is the swing motor (M7) rotating in reverse at the fixed timing?
NO
Replace the motor.
YES
END
[Procedure 2]
Is the safety zone switch (MS3) working normally?
NO
Replace the switch.
YES
Is the safety zone switch (MS3) correctly pressed?
NO
Fix the mechanism.
YES
Is the swing guide closed detection switch-2 (MS6) working normally?
NO
Replace the switch.
YES
Is the swing guide closed detection switch-2 (MS6) correctly pressed?
NO
Fix the mechanism.
YES
Replace the finisher controller PC board.
Содержание e-studio550
Страница 115: ...JUNE 2002 TOSHIBA TEC 4 11 e STUDIO550 650 810 PREVENTIVE MAINTENANCE Rear side 20 74 75 32 80 63 44 73 75 53 ...
Страница 309: ...JUNE 2002 TOSHIBA TEC 8 1 e STUDIO550 650 810 WIREHARNESSCONNECTIONDIAGRAMS 8 WIRE HARNESS CONNECTION DIAGRAMS ...
Страница 313: ...1 1 KANDA NISHIKI CHO CHIYODA KU TOKYO 101 8442 JAPAN R02032112000 TTEC ...