e-STUDIO550/650/810 TROUBLE SHOOTING
5 - 82
JUNE 2002 © TOSHIBA TEC
[CB3] Tray lifting motor driving abnormally
<Procedure 1>
Is the tray 1 home position sensor working properly?
Replace the tray 1 home position sensor.
Is the tray 1 lifting mechanism working properly?
Correct the defect of the mechanism.
Is 24V supplied to the tray1 lifting motor from the finisher control board at the timing of tray
driving?
Replace the finisher control board.
Is the harness between the finisher control board and tray 1 lifting motor normal?
Replace the harness.
Replace the tray 1 lifting motor.
<Procedure 2>
Is the tray 1 lifted/lowered?
Are the tray 1 lifting motor clock sensor 1 and 2 working properly?
Replace the sensor board.
Replace the finisher control board.
Is the power supplied to the motor from the finisher control board at the timing of tray 1 lifting?
Replace the finisher control board.
Is there any abnormality at the tray 1 lifting mechanism?
Correct the defect of the mechanism.
Replace the tray 1 lifting motor.
NO
YES
NO
YES
NO
YES
NO
YES
NO
YES
NO
YES
NO
YES
NO
YES
Содержание e-studio550
Страница 115: ...JUNE 2002 TOSHIBA TEC 4 11 e STUDIO550 650 810 PREVENTIVE MAINTENANCE Rear side 20 74 75 32 80 63 44 73 75 53 ...
Страница 309: ...JUNE 2002 TOSHIBA TEC 8 1 e STUDIO550 650 810 WIREHARNESSCONNECTIONDIAGRAMS 8 WIRE HARNESS CONNECTION DIAGRAMS ...
Страница 313: ...1 1 KANDA NISHIKI CHO CHIYODA KU TOKYO 101 8442 JAPAN R02032112000 TTEC ...