JUNE 2002 © TOSHIBA TEC
5 - 83
e-STUDIO550/650/810 TROUBLE SHOOTING
<Procedure 3>
Is the tray 2 home position sensor working properly?
Replace the tray 2 home position sensor.
Is the tray 2 lifting mechanism working properly?
Correct the defect of the mechanism.
Is 24V supplied to the tray 2 lifting motor from the finisher control board at the timing of tray
driving?
Replace the finisher control board.
Is the harness between the finisher control board and tray 2 lifting motor normal?
Replace the harness.
Replace the tray 2 lifting motor.
<Procedure 4>
Is the tray 2 lifted/lowered?
Are the tray 2 lifting motor clock sensor 1 and 2 working normally?
Replace the sensor board.
Replace the finisher control board.
Is the power supplied to the motor from the finisher control board at the timing of tray 2 lifting?
Replace the finisher control board.
Is there any abnormality at the tray 2 lifting mechanism?
Correct the defect of the mechanism.
Replace the tray 2 lifting motor.
NO
YES
NO
YES
NO
YES
NO
YES
NO
YES
NO
YES
NO
YES
NO
YES
Содержание e-studio550
Страница 115: ...JUNE 2002 TOSHIBA TEC 4 11 e STUDIO550 650 810 PREVENTIVE MAINTENANCE Rear side 20 74 75 32 80 63 44 73 75 53 ...
Страница 309: ...JUNE 2002 TOSHIBA TEC 8 1 e STUDIO550 650 810 WIREHARNESSCONNECTIONDIAGRAMS 8 WIRE HARNESS CONNECTION DIAGRAMS ...
Страница 313: ...1 1 KANDA NISHIKI CHO CHIYODA KU TOKYO 101 8442 JAPAN R02032112000 TTEC ...