e-STUDIO550/650/810 TROUBLE SHOOTING
5 - 54
JUNE 2002 © TOSHIBA TEC
[C13] Abnormal 1st cassette tray (paper can be fed from the cassettes other than copier cassettes)
[C14] Abnormal 2nd cassette tray (paper can be fed from the cassettes other than copier cassettes)
[C15] Abnormal 3rd cassette tray (paper can be fed from the cassettes other than 3rd cassette)
[C16] Abnormal 4th cassette tray (paper can be fed from the cassettes other than 4th cassette)
Does the tray go up? (Perform the output check in the test mode: 03-242, 243)
NO
1. Check if the connector of the tray-up motor is disconnected.
2. Check if the connector J311 on the LGC board is disconnected.
3. Check if the connector pins are disconnected and the harnesses are open-circuited.
4. Check if the conductor pattern on the LGC board is short- or open-circuited.
5. Replace the LGC board.
YES
Is the tray-up sensor working?
(Perform the input check in the test mode: 03-[FAX]OFF/[6]/[H], /[7]/[H])
NO
1. Check if the connector of the sensor is disconnected.
2. Check if the connector J310 on the LGC board is disconnected.
3. Check if the slit reaches the sensor.
4. Check if the connector pins are disconnected and the harnesses are open-circuited.
5. Check if the conductor pattern on the LGC board is short- or open-circuited.
6. Replace the LGC board.
YES
1. Check if the conductor pattern on the LGC board is short- or open-circuited.
2. Replace the LGC board.
Содержание e-studio550
Страница 115: ...JUNE 2002 TOSHIBA TEC 4 11 e STUDIO550 650 810 PREVENTIVE MAINTENANCE Rear side 20 74 75 32 80 63 44 73 75 53 ...
Страница 309: ...JUNE 2002 TOSHIBA TEC 8 1 e STUDIO550 650 810 WIREHARNESSCONNECTIONDIAGRAMS 8 WIRE HARNESS CONNECTION DIAGRAMS ...
Страница 313: ...1 1 KANDA NISHIKI CHO CHIYODA KU TOKYO 101 8442 JAPAN R02032112000 TTEC ...