JUNE 2002 © TOSHIBA TEC
4 - 13
e-STUDIO550/650/810 PREVENTIVE MAINTENANCE
Remarks “*” in the Preventive Maintenance Check List
*1 Original glass
Clean both sides of the original glass.
Note: Make sure that there is no fingerprints or oil staining on part of the original glass on where the original
scale is mounted since the shading correction plate is located below the scale to be scanned.
*2 Slit glass
Take off the skit glass unit and clean the face side and back side of the glass.
*3 Pickup roller and feed roller
When installing the pickup roller and feed roller, pay attention to allocate the pickup roller, gear, feed
roller and one-way clutch correctly.
*4 Separation roller
When replacing the separation roller, replace only the roller and continue to use the torque limitter.
(2)
(1)
Gear
Pickup roller
Idler gear
shaft
Torque
limitter
Separation roller
Feed roller
One-way
clutch
Slit glass
Cleaning face
Содержание e-studio550
Страница 115: ...JUNE 2002 TOSHIBA TEC 4 11 e STUDIO550 650 810 PREVENTIVE MAINTENANCE Rear side 20 74 75 32 80 63 44 73 75 53 ...
Страница 309: ...JUNE 2002 TOSHIBA TEC 8 1 e STUDIO550 650 810 WIREHARNESSCONNECTIONDIAGRAMS 8 WIRE HARNESS CONNECTION DIAGRAMS ...
Страница 313: ...1 1 KANDA NISHIKI CHO CHIYODA KU TOKYO 101 8442 JAPAN R02032112000 TTEC ...