e-STUDIO550/650/810 ADJUSTMENT
3 - 18
June 2002 © TOSHIBA TEC
(h) Bottom margin
1. Turn ON the power while the digital keys [0] and [5] are pressed simultaneously.
(Adjustment
mode)
2. Open the RADF.
3. Select the condition of 2nd cassette (A3/LD) and 100% and press the [ENERGY SAVER] key to
make a copy.
4. Measure the blank area G at the trailing edge of the copied image.
5. Check if the blank area G is within the range of 2±0.5 mm.
6. If not, change the value taking the following procedure, and repeat the steps 2 to 4 until the area
falls within range.
<Procedure>
(Adjustment mode)
(Enter the code [433] with the digital keys)
[START]
(Enter value (acceptable values : 0 to 255) with the digital keys)
Press the [SET] or the [INTERRUPT] key to store the value in the RAM.
(“100% A” is displayed.)
* The larger the adjustment value, the wider the blank area at the trailing edge be-
comes (0.0423 mm/step).
Feeding direction
G
Содержание e-studio550
Страница 115: ...JUNE 2002 TOSHIBA TEC 4 11 e STUDIO550 650 810 PREVENTIVE MAINTENANCE Rear side 20 74 75 32 80 63 44 73 75 53 ...
Страница 309: ...JUNE 2002 TOSHIBA TEC 8 1 e STUDIO550 650 810 WIREHARNESSCONNECTIONDIAGRAMS 8 WIRE HARNESS CONNECTION DIAGRAMS ...
Страница 313: ...1 1 KANDA NISHIKI CHO CHIYODA KU TOKYO 101 8442 JAPAN R02032112000 TTEC ...