JUNE 2002 © TOSHIBA TEC
5 - 93
e-STUDIO550/650/810 TROUBLE SHOOTING
[CC1] Abnormal Saddle stitcher microswitch
[Procedure 1]
Is the switch actuator for the inlet door working properly?
NO
Fix the mechanism.
YES
Is the inlet cover switch (MS1S) working normally?
NO
Replace the switch.
YES
Measure the voltage of J10-8 on the saddle stitcher controller PC board when the inlet door is open.
Is it 5V?
NO
The inlet cover sensor (PI9S) is broken. Replace it.
YES
Measure the voltage between J19-2 (+) and J19-1 (-) on the saddle stitcher controller PC board. Is it
24 V?
NO
Replace the saddle stitcher controller PC board.
YES
Check the wiring between J19 on the finisher controller PC board and J1 on the saddle stitcher
controller PC board. If there is no problem, replace the saddle stitcher controller PC board.
Содержание e-studio550
Страница 115: ...JUNE 2002 TOSHIBA TEC 4 11 e STUDIO550 650 810 PREVENTIVE MAINTENANCE Rear side 20 74 75 32 80 63 44 73 75 53 ...
Страница 309: ...JUNE 2002 TOSHIBA TEC 8 1 e STUDIO550 650 810 WIREHARNESSCONNECTIONDIAGRAMS 8 WIRE HARNESS CONNECTION DIAGRAMS ...
Страница 313: ...1 1 KANDA NISHIKI CHO CHIYODA KU TOKYO 101 8442 JAPAN R02032112000 TTEC ...