Thermo 15i, Инструкция по эксплуатации

Страница: 48 / 288

Operation
Range Menu
3-12 Model 15 i Instruction Manual Thermo Fisher Scientific
By default, in the auto range mode, the analog outputs are arranged on the
rear panel connector as shown in
Figure 3–7 . See Table 3–4 for channels
and pin connections. Auto range mode may be selected from the “ Range
Mode Select ” in the “ Service Menu ”, later in this chapter.
Figure 3–7. Pin-Out of Rear Connector in Auto Range Mode
Table 3–4. Default Analog Outputs in Auto Range Mode
Channel Connector Pin I/O Terminal Pin Description
1 14 1 HCl Analog Output
2 33 3 HCl Range Status:
half-scale = high range
zero scale = low range
3 15 5 None
4 34 7 None
5 17 9 None
6 36 11 None
Ground 16, 18, 19, 35, 37 2, 4, 6, 8, 10, 12 Signal Ground
Note All channels are user definable. If any customization has been made
to the analog output configuration, the default selections may not apply. ▲