Thermo Scientific TriPlus RSH, Руководство пользователя

Страница: 133 / 258

3
Setup Menu Item
Setup Menu Item Modules
Thermo Scientific TriPlus RSH User Guide 107
SW Out2
Switch-out Signal, Relay contact
Signal On
Low Active
TTL In1
Transistor-Transistor Logic
Debounce Time
Low Active
TTL In2
Transistor-Transistor Logic
Signal On
Debounce Time
Low Active
TTL In3
Transistor-Transistor Logic
Signal On
Debounce Time
Low Active
TTL Out1
Transistor-Transistor Logic
Signal On
Low Active
TTL Out2
Transistor-Transistor Logic
Signal On
Low Active
TTL Out3
Transistor-Transistor Logic
Signal On
Low Active
Beep Volume Selectable scale from 1 to 5
Debounce Time Specifies how long the signal is applied.
Low Active A standby status of a signal from the
chromatographic system can be
High Active
or Low Active . Depending on what has to be
applied for the specific system, one has to
match the signal logic on the TriPlus RSH
side.
By setting a mark to
Low Active means that
Low Active is selected. Low Active disabled
means High Active selected.
Information for the required signal logic is
provided with the schematic of the sync cable
which is part of the GC mounting kit.
Signal On The term Signal On means that the signal
has been sent or received.
Output/Voltage An output voltage in the range from 0 V
to 35 V can be selected.
Trigger Event Select the desired type of output signal for
testing.
Table 39. List of Items for Input and Output Signals (Sheet 2 of 3)
Item Description