Teledyne T200, Руководство по эксплуатации, Страница: 67 / 425

Teledyne API
– T200 NO/NO
2
/NO
X
Analyzer Operation Manual Getting Started
65
Suppresses the
warning messages
Press CLR to clear the current
message.
If more than one warning is active, the
next message will take its place until all
warning messages have been cleared.
Once the last warning has
been cleared, the analyzer will
automatically switch to
SAMPLE mode
NOTE:
If a warning message persists after
several attempts to clear it, the message
may indicate a real problem and not an
artifact of the warm-up period
SAMPLE SYSTEM RESET
TEST CAL MSG CLR SETUP
SAMPLE SYSTEM RESET
TEST CAL MSG CLR SETUP
SAMPLE SYSTEM RESET
TEST CAL MSG CLR SETUP
SYSTEM SYSTEM RESET
TEST CLR SETUP
MSG returns the active
warnings to the message
field.
STANDBY RANGE=500.0 PPB NOX=XXXX
TEST CAL MSG SETUP
Concentration field displays
all gases.
Table 3-11 lists brief descriptions of the warning messages that may occur during start
up.
06858E DCN7057