Teledyne T200, Руководство по эксплуатации, Страница: 355 / 425

Teledyne API - T200, T204 and 200E Series (05295F DCN6900)
Appendix A3: Warnings and Test Measurements, Software Version K.3
A-11
Warning Name
1
Message Text Description
WRCELLPRESS RCELL PRESS WARN Reaction cell pressure outside of
warning limits.
WBOXTEMP BOX TEMP WARNING Chassis temperature outside of
warning limits.
WRCELLTEMP RCELL TEMP WARNING Reaction cell temperature outside of
warning limits.
WMANIFOLDTEMP
4
MANIFOLD TEMP WARN Bypass or dilution manifold
temperature outside of warning
limits.
WCO2CELLTEMP
8
CO2 CELL TEMP WARN CO
2
sensor cell temperature outside
of warning limits.
WO2CELLTEMP
5
O2 CELL TEMP WARN O
2
sensor cell temperature outside of
warning limits.
WO3CELLTEMP
13
O3 CELL TEMP WARN O
3
sensor sample temperature
outside of warning limits.
WO3PHOTOREF
13
O3 CELL PHOTOREF WARN O
3
sensor photometer reference
signal warning.
WO3LAMPTEMP
13
O3 CELL LAMP WARN O
3
cell lamp temperature warning.
WO3PRESSURE
13
O3 CELL PRESS WARN O
3
cell pressure warning.
WIZSTEMP IZS TEMP WARNING IZS temperature outside of warning
limits.
WCONVTEMP CONV TEMP WARNING Converter temperature outside of
warning limits.
WPMTTEMP PMT TEMP WARNING PMT temperature outside of warning
limits.
WAUTOZERO
WPREREACT
11
AZERO WRN XXX.X MV
PRACT WRN XXX.X MV
11
Auto-zero reading above limit. Value
shown in message indicates auto-
zero reading at time warning was
displayed.
WHVPS HVPS WARNING High voltage power supply output
outside of warning limits.
WDYNZERO CANNOT DYN ZERO Contact closure zero calibration
failed while DYN_ZERO was set to
ON
.
WDYNSPAN CANNOT DYN SPAN Contact closure span calibration
failed while DYN_SPAN was set to
ON .
WREARBOARD REAR BOARD NOT DET Rear board was not detected during
power up.
WRELAYBOARD RELAY BOARD WARN Firmware is unable to communicate
with the relay board.
06858E DCN7057