Teledyne T200, Руководство по эксплуатации, Страница: 17 / 425

15
1.
INTRODUCTION
Teledyne API‟s Model T200 (also referred to as T200)
NO/NO
2
/NO
X
Analyzer uses
chemiluminescence detection (see Principles of Operation, Section 13, this manual),
coupled with state-of-the-art microprocessor technology to provide the sensitivity,
stability and ease of use needed for ambient or dilution CEM monitoring requirements
of nitric oxide (NO), nitrogen dioxide (NO
2
) and total nitrogen oxides (NO
x
). Along
with providing high accuracy and dependability, the T200 tracks operational parameters
and issues warnings if they fall outside diagnostic limits, as well as stores easily
retrievable data..
1.1. FEATURES
Some of the other exceptional features of your T200 Nitrogen Oxides Analyzer are:

Ranges, 0-50 ppb to 0-20 ppm, user selectable

Independent ranges and auto ranging

Large, vivid, and durable graphics display with touch screen interface

Microprocessor controlled for versatility

Multi-tasking software to allow viewing test variables while operating

Continuous self checking with alarms

Permeation dryer on ozone generator

Bi-directional RS-232, optional USB and RS-485, and 10/100Base-T Ethernet
ports for remote operation

Front panel USB ports for peripheral devices and firmware upgrades

Digital status outputs to provide instrument operating condition

Adaptive signal filtering to optimize response time

Temperature and pressure compensation

Converter efficiency correction software

Catalytic ozone destruct

Comprehensive internal data logging with programmable averaging periods

Ability to log virtually any operating parameter

8 analog inputs (optional)

Internal zero and span check (optional)
06858E DCN7057