Teledyne T200, Руководство по эксплуатации, Страница: 162 / 425

Data Acquisition System (DAS) and APICOM Teledyne API
– T200 NO/NO
2
/NO
X
Analyzer Operation Manual
160
To define the REPORT PERIOD , follow the instruction shown in Section 7.1.3 then
press:
Starting at the
EDIT CHANNEL MENU
SETUP X.X
0) CONC: ATIMER 5, 800
PREV NEXT INS DEL
EDIT
PRNT
EXIT
SETUP X.X
NAME: CONC
<SET SET>
EDIT EXIT
SETUP X.X
REPORT PERIOD:000:01:00
<SET SET >
EDIT
EXIT
Use the
PREV
and
NEXT
buttons to
scroll to the
DATA
CHANNEL
to be
edited.
SETUP X.X
REPORT PERIOD DAYS:0
0 0 0 ENTR EXIT
Toggle these buttons to
set the days between
reports (0 – 366).
SETUP X.X
REPORT PERIOD TIME:01:00
0 1 :0 0 ENTR EXIT
Press buttons to set amount of
time between reports, in hours
(HH) and/or minutes (MM)
(max: 23:59). 01:00 sets a
report to be made every hour.
EXIT
discards the new
setting.
ENTR
accepts the
new setting.
Continue pressing
SET>
until ...
The SAMPLE PERIOD and REPORT PERIOD intervals are synchronized to the
beginning and end of the appropriate interval of the instruments internal clock.

If
SAMPLE PERIOD
is set for one minute the first reading would occur at the
beginning of the next full minute according to the instrument’s internal clock.

If the
REPORT PERIOD
is set for of one hour, the first report activity would occur at
the beginning of the next full hour according to the instrument’s internal clock.
EXAMPLE:
Given the above settings, if DAS parameters are activated at 7:57:35 the first sample
would occur at 7:58 and the first report would be calculated at 8:00 consisting of data
points for 7:58. 7:59 and 8:00.
During the next hour (from 8:01 to 9:00), the instrument will take a sample reading
every minute and include 60 sample readings.
06858E DCN7057